United States
Tele: 734-483-4233
sales@electroarc.com
United Kingdom
Tele: 01384-263426
sales@electroarc.co.uk
|
Disintegrator Models
Over 50 disintegrator systems to choose from...
Table and Base Specifications
• Ground cast iron surface with coolant spill trough and drain
• T- slots for holding parts
• Steel-framed cabinet has heavy-duty ball bearing casters and levelers
Models pictured below from left to right
MODEL 2 SE
• Single Arm Superstructure
• Semi-Automatic Feed
• 19" x 19" work top
See other 2-SE Series Models in chart below.
MODEL 2-SAT
• Single Arm Superstructure
• Auto Feed
• Convenient Lift Rack
• 32" x 32" work top
See other 2-SA Series Models in chart below
MODEL 2-DVQT
• Vertical-plane Double Barrel Superstructure for rigidity
• Convenient Lift Rack
• Auto Feed
• 32" x 32" work top
See other 2-DV Series Models in chart below
|
Models pictured below from left to right
MODEL 1-SVQT
• Q Head with AutoFeed
• Up-Front Control Module
Other S-Series models in chart below
MODEL HK-6VQT
• Our largest table
• Up-Front Control Module
SEE ALSO: HK-10QT and 10-SG
|
Table and Base Specifications
• Ground cast iron surface with coolant spill trough and drain
• T- slots for holding parts
• Steel-framed cabinet has heavy-duty ball bearing casters and levelers
|
Model HK-10QT our most fully equipped model.
This versatile, rugged machine features a motorized head carriage, up-front fingertip controls, a big 4000-lb capacity table, our heavy-duty "Q" head, and heavy-duty power supply with multiple heat settings.
|
|
A. Transistorized Automatic Feed with Amp Sensing for optimal performance
B. Main Control Module right at the head gives you eye-level, fingertip control of all major functions
C. Massive, 60" high superstructure with 4.5" column and motorized vertical and horizontal rack movement with variable-speed crossarms for precise head positioning.
D. Large 51 x 39.5" ground, cast-iron work surface with 8 3/4" T-slots
E. Vertical duplex crossarms for reach, rigidity, and control |
Special machines
Electro Arc frequently responds to special needs by building custom machines, table tops, and workholding fixtures for industrial clients. Our full-time engineering
staff is available for consultation at your location.
|
 |
Model 10-SG (Special)
|
Call us for estimates and expert consultation. Click on the "Locations" button for nearest office.
Power Supplies
|
 |
3 KVA, 10 KVA, 15 KVA, 20 KVA
Larger diameter holes require more power to maintain an effective arc.
3 KVA disintegrates taps up to 3/8" in one single pass.
10 KVA disintegrates taps up to 3/4" in one single pass.
15 KVA disintegrates taps up to 1-1/4" in one single pass.
20 KVA designed for larger taps, drills, studs, and bolts. |
|
Electro Arc Molybdenum Electrodes are Unique
Electro Arc Metal Disintegrators can use any material that conducts electricity as an electrode. However, different materials offer varying levels of efficiency in the process.
It is important to use an electrode material that breaks down less than the work piece. Materials with low melting points, such as copper, erode as rapidly as the work material, requiring frequent replacement, which adds to your labor cost.
Because their high melting temperature out performs other electrode materials, Electro Arc recommends - and provides - molybdenum electrodes in a variety of shapes and lengths; round, square, and hex cross section; lengths in 6", 9", or 12". A 12" length can remove 35 to 40 taps.
|
|
|
|
